[Intel® Joule™] Connect
micro HDMI to HDMI cable,
power connector supplied by OpenCR1.0,
USB devices including
Bootable USB drive,
keyboard. You might need a USB hub to plug multiple USB devices into Joule.
[Intel® Joule™] Installation will be proceeded as shown in below images. When Joule is turned on, monitor will blink about 3 times after 5 seconds, and print menu screen. Press F7 to go to
[Intel® Joule™] Select USB Device.
[Intel® Joule™] Select Erase disk and install Ubuntu then continue.
Intel® Joule™ has two different disk drives: 16GB micro SD Card and 16GB eMMC. In this instruction, it is highly recommended to install
Alternarive Ubuntu for Joule on the
16GB eMMC. Select
MMC/SD card #2 (mmcblk1) - 15.7 GB MMC 016G32 then continue.
[Intel® Joule™] Installation will take about 10 minutes.
[Intel® Joule™] When installation is completed, click Restart Now.
[Intel® Joule™] Remove bootable USB drive from Joule.
[Intel® Joule™] Don’t press any key. It will boot from 16GB eMMC which is a default boot device.
[Intel® Joule™] Finish the rest of settings.