Edit on GitHub

Java Bulk Read Write Protocol 2.0

Sample code

/*
 * BulkReadWrite.java
 *
 *  Created on: 2016. 6. 23.
 *      Author: Ryu Woon Jung (Leon)
 */

//
// *********     Bulk Read and Bulk Write Example      *********
//
//
// Available Dynamixel model on this example : All models using Protocol 2.0
// This example is designed for using two Dynamixel PRO 54-200, and an USB2DYNAMIXEL.
// To use another Dynamixel model, such as X series, see their details in E-Manual(support.robotis.com) and edit below variables yourself.
// Be sure that Dynamixel PRO properties are already set as %% ID : 1 and 2 / Baudnum : 3 (Baudrate : 1000000 [1M])
//

import java.util.Scanner;

public class BulkReadWrite
{
  public static void main(String[] args)
  {
    // Control table address
    short ADDR_PRO_TORQUE_ENABLE        = 562;                 // Control table address is different in Dynamixel model
    short ADDR_PRO_LED_RED              = 563;
    short ADDR_PRO_GOAL_POSITION        = 596;
    short ADDR_PRO_PRESENT_POSITION     = 611;


    // Data Byte Length
    short LEN_PRO_LED_RED               = 1;
    short LEN_PRO_GOAL_POSITION         = 4;
    short LEN_PRO_PRESENT_POSITION      = 4;

    // Protocol version
    int PROTOCOL_VERSION                = 2;                   // See which protocol version is used in the Dynamixel

    // Default setting
    byte DXL1_ID                        = 1;                   // Dynamixel ID: 1
    byte DXL2_ID                        = 2;                   // Dynamixel ID: 2
    int BAUDRATE                        = 1000000;
    String DEVICENAME                   = "/dev/ttyUSB0";      // Check which port is being used on your controller
                                                               // ex) "COM1"   Linux: "/dev/ttyUSB0"

    byte TORQUE_ENABLE                  = 1;                   // Value for enabling the torque
    byte TORQUE_DISABLE                 = 0;                   // Value for disabling the torque
    int DXL_MINIMUM_POSITION_VALUE      = -150000;             // Dynamixel will rotate between this value
    int DXL_MAXIMUM_POSITION_VALUE      = 150000;              // and this value (note that the Dynamixel would not move when the position value is out of movable range. Check e-manual about the range of the Dynamixel you use.)
    int DXL_MOVING_STATUS_THRESHOLD     = 20;                  // Dynamixel moving status threshold

    String KEY_FOR_ESCAPE               = "e";                 // Key for escape

    int COMM_SUCCESS                    = 0;                   // Communication Success result value
    int COMM_TX_FAIL                    = -1001;               // Communication Tx Failed

    // Instead of getch
    Scanner scanner = new Scanner(System.in);

    // Initialize Dynamixel class for java
    Dynamixel dynamixel = new Dynamixel();

    // Initialize PortHandler Structs
    // Set the port path
    // Get methods and members of PortHandlerLinux or PortHandlerWindows
    int port_num = dynamixel.portHandler(DEVICENAME);

    // Initialize PacketHandler Structs
    dynamixel.packetHandler();

    // Initialize GroupBulkWrite Struct
    int groupwrite_num = dynamixel.groupBulkWrite(port_num, PROTOCOL_VERSION);

    // Initialize Groupsyncwrite instance
    int group_num = dynamixel.groupBulkRead(port_num, PROTOCOL_VERSION);

    int index = 0;
    int dxl_comm_result = COMM_TX_FAIL;                         // Communication result
    Boolean dxl_addparam_result = false;                        // AddParam result
    Boolean dxl_getdata_result = false;                         // GetParam result
    int[] dxl_goal_position = new int[]{DXL_MINIMUM_POSITION_VALUE, DXL_MAXIMUM_POSITION_VALUE};         // Goal position

    byte dxl_error = 0;                                         // Dynamixel error
    byte[] dxl_led_value = new byte[]{0, (byte) 0xFF};          // Dynamixel LED value for write
    int dxl1_present_position = 0;                              // Present position
    short dxl2_led_value_read = 0;                              // Dynamixel moving status

    // Open port
    if (dynamixel.openPort(port_num))
    {
      System.out.println("Succeeded to open the port!");
    }
    else
    {
      System.out.println("Failed to open the port!");
      System.out.println("Press any key to terminate...");
      scanner.nextLine();
      return;
    }

    // Set port baudrate
    if (dynamixel.setBaudRate(port_num, BAUDRATE))
    {
      System.out.println("Succeeded to change the baudrate!");
    }
    else
    {
      System.out.println("Failed to change the baudrate!");
      System.out.println("Press any key to terminate...");
      scanner.nextLine();
      return;
    }

    // Enable Dynamixel#1 Torque
    dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL1_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_ENABLE);
    if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
    {
      dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
    }
    else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
    {
      dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
    }
    else
    {
      System.out.printf("Dynamixel#%d has been successfully connected\n", DXL1_ID);
    }

    // Enable Dynamixel#2 Torque
    dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL2_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_ENABLE);
    if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
    {
      dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
    }
    else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
    {
      dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
    }
    else
    {
      System.out.printf("Dynamixel#%d has been successfully connected\n", DXL2_ID);
    }

    // Add parameter storage for Dynamixel#1 present position value
    dxl_addparam_result = dynamixel.groupBulkReadAddParam(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);
    if (dxl_addparam_result != true)
    {
      System.out.printf("[ID: %d] groupBulkRead addparam failed\n", DXL1_ID);
      return;
    }

    // Add parameter storage for Dynamixel#2 present moving value
    dxl_addparam_result = dynamixel.groupBulkReadAddParam(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);
    if (dxl_addparam_result != true)
    {
      System.out.printf("[ID: %d] groupBulkRead addparam failed\n", DXL2_ID);
      return;
    }

    while (true)
    {
      System.out.println("Press enter to continue! (or press e then enter to quit!)");
      if(scanner.nextLine().equals(KEY_FOR_ESCAPE))
        break;

      // Add parameter storage for Dynamixel#1 goal position
      dxl_addparam_result = dynamixel.groupBulkWriteAddParam(groupwrite_num, DXL1_ID, ADDR_PRO_GOAL_POSITION, LEN_PRO_GOAL_POSITION, dxl_goal_position[index], LEN_PRO_GOAL_POSITION);
      if (dxl_addparam_result != true)
      {
        System.out.printf("[ID: %d] groupBulkWrite addparam failed", DXL1_ID);
        return;
      }

      // Add parameter storage for Dynamixel#2 LED value
      dxl_addparam_result = dynamixel.groupBulkWriteAddParam(groupwrite_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED, dxl_led_value[index], LEN_PRO_LED_RED);
      if (dxl_addparam_result != true)
      {
        System.out.printf("[ID: %d] groupBulkWrite addparam failed", DXL2_ID);
        return;
      }

      // Bulkwrite goal position and LED value
      dynamixel.groupBulkWriteTxPacket(groupwrite_num);
      if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
        dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);

      // Clear bulkwrite parameter storage
      dynamixel.groupBulkWriteClearParam(groupwrite_num);

      do
      {
        // Bulkread present position and moving status
        dynamixel.groupBulkReadTxRxPacket(group_num);
        if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
          dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);

        dxl_getdata_result = dynamixel.groupBulkReadIsAvailable(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);
        if (dxl_getdata_result != true)
        {
          System.out.printf("[ID: %d] groupBulkRead getdata failed\n", DXL1_ID);
          return;
        }

        dxl_getdata_result = dynamixel.groupBulkReadIsAvailable(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);
        if (dxl_getdata_result != true)
        {
          System.out.printf("[ID: %d] groupBulkRead getdata failed\n", DXL2_ID);
          return;
        }

        // Get Dynamixel#1 present position value
        dxl1_present_position = dynamixel.groupBulkReadGetData(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);

        // Get Dynamixel#2 moving status value
        dxl2_led_value_read = (short)dynamixel.groupBulkReadGetData(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);


        System.out.printf("[ID: %d] Present Position : %d [ID: %d] LED Value : %d\n", DXL1_ID, dxl1_present_position, DXL2_ID, dxl2_led_value_read);

      } while (Math.abs(dxl_goal_position[index] - dxl1_present_position) > DXL_MOVING_STATUS_THRESHOLD);

      // Change goal position
      if (index == 0)
      {
        index = 1;
      }
      else
      {
        index = 0;
      }
    }

    // Disable Dynamixel#1 Torque
    dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL1_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_DISABLE);
    if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
    {
      dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
    }
    else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
    {
      dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
    }

    // Disable Dynamixel#2 Torque
    dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL2_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_DISABLE);
    if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
    {
      dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
    }
    else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
    {
      dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
    }

    // Close port
    dynamixel.closePort(port_num);

    return;
  }
}

Details

import java.util.Scanner;

The functions Scanner.* for I, are in the example code, and it uses java.util.Scanner library.

// Control table address
short ADDR_PRO_TORQUE_ENABLE        = 562;                 // Control table address is different in Dynamixel model
short ADDR_PRO_LED_RED              = 563;
short ADDR_PRO_GOAL_POSITION        = 596;
short ADDR_PRO_PRESENT_POSITION     = 611;

// Data Byte Length
short LEN_PRO_LED_RED               = 1;
short LEN_PRO_GOAL_POSITION         = 4;
short LEN_PRO_PRESENT_POSITION      = 4;

Dynamixel series have their own control tables: Addresses and Byte Length in each items. To control one of the items, its address (and length if necessary) is required. Find your requirements in http://emanual.robotis.com/.

// Protocol version
int PROTOCOL_VERSION                = 2;                   // See which protocol version is used in the Dynamixel

Dynamixel uses either or both protocols: Protocol 1.0 and Protocol 2.0. Choose one of the Protocol which is appropriate in the Dynamixel.

// Default setting
byte DXL1_ID                        = 1;                   // Dynamixel ID: 1
byte DXL2_ID                        = 2;                   // Dynamixel ID: 2
int BAUDRATE                        = 1000000;
String DEVICENAME                   = "/dev/ttyUSB0";      // Check which port is being used on your controller
                                                           // ex) "COM1"   Linux: "/dev/ttyUSB0"

byte TORQUE_ENABLE                  = 1;                   // Value for enabling the torque
byte TORQUE_DISABLE                 = 0;                   // Value for disabling the torque
int DXL_MINIMUM_POSITION_VALUE      = -150000;             // Dynamixel will rotate between this value
int DXL_MAXIMUM_POSITION_VALUE      = 150000;              // and this value (note that the Dynamixel would not move when the position value is out of movable range. Check e-manual about the range of the Dynamixel you use.)
int DXL_MOVING_STATUS_THRESHOLD     = 20;                  // Dynamixel moving status threshold

String KEY_FOR_ESCAPE               = "e";                 // Key for escape

Here we set some variables to let you freely change them and use them to run the example code.

As the document previously said in previous chapter, customize Dynamixel control table items, such as DXL_ID number, communication BAUDRATE, and the DEVICENAME, on your own terms of needs. In particular, BAUDRATE and DEVICENAME have systematical dependencies on your controller, so make clear what kind of communication method you will use.

The example uses two DYNAMIXEL’s DXL1_ID, DXL2_ID connected with the port DEVICENAME.

Dynamixel basically needs the TORQUE_ENABLE to be rotating or give you its internal information. On the other hand, it doesn’t need torque enabled if you get your goal, so finally do TORQUE_DISABLE to prepare to the next sequence.

Since the Dynamixel has its own rotation range, it may shows malfunction if your request on your dynamixel is out of range. For example, Dynamixel MX-28 and Dynamixel PRO 54-200 has its rotatable range as 0 ~ 4028 and -250950 ~ 250950, each.

Dynamixel LED has its own range of value: 1 byte red LED for Dynamixel MX-28 and 1byte each on red, green, blue LED for Dynamixel PRO 54-200.

DXL_MOVING_STATUS_THRESHOLD acts as a criteria for verifying its rotation stopped.

int COMM_SUCCESS                    = 0;                   // Communication Success result value
int COMM_TX_FAIL                    = -1001;               // Communication Tx Failed

Each of the variables above show the meaning of the communication result value.

// Instead of getch
Scanner scanner = new Scanner(System.in);

This initializes instance for key detection.

// Initialize Dynamixel class for java
Dynamixel dynamixel = new Dynamixel();

This initializes Dynamixel class.

// Initialize PortHandler Structs
// Set the port path
// Get methods and members of PortHandlerLinux or PortHandlerWindows
int port_num = dynamixel.portHandler(DEVICENAME);

portHandler() function sets port path as DEVICENAME and get port_num, and prepares an appropriate functions for port control in controller OS automatically. port_num would be used in many functions in the body of the code to specify the port for use.

// Initialize PacketHandler Structs
dynamixel.packetHandler();

packetHandler() function initializes parameters used for packet construction and packet storing.

// Initialize GroupBulkWrite Struct
int groupwrite_num = dynamixel.groupBulkWrite(port_num, PROTOCOL_VERSION);

groupBulkWrite() function initializes grouped parameters used for packet construction and packet storing. The utility functions of bulk read deals simultaneously with more than one Dynamixel through #port_num port, building packets by the function which uses PROTOCOL_VERSION.

// Initialize Groupbulkread Structs
int groupread_num = dynamixel.groupBulkRead(port_num, PROTOCOL_VERSION);

groupBulkRead() function initializes grouped parameters used for packet construction and packet storing. The utility functions of bulk read deals simultaneously with more than one Dynamixel through #port_num port, building packets by the function which uses PROTOCOL_VERSION.

int index = 0;
int dxl_comm_result = COMM_TX_FAIL;                         // Communication result
Boolean dxl_addparam_result = false;                        // AddParam result
Boolean dxl_getdata_result = false;                         // GetParam result
int[] dxl_goal_position = new int[]{DXL_MINIMUM_POSITION_VALUE, DXL_MAXIMUM_POSITION_VALUE};         // Goal position

byte dxl_error = 0;                                         // Dynamixel error
byte[] dxl_led_value = new byte[]{0, (byte) 0xFF};          // Dynamixel LED value for write
int dxl1_present_position = 0;                              // Present position
short dxl2_led_value_read = 0;                              // Dynamixel moving status

index variable points the direction to where the Dynamixel should be rotated.

dxl_comm_result indicates which error has been occurred during packet communication.

dxl_addparam_result indicates the result of parameter addition used for sync/bulk related functions

dxl_getdata_result indicates the result of data reception used for sync/bulk related functions

dxl_goal_position stores goal points of Dynamixel rotation.

dxl_error shows the internal error in Dynamixel.

dxl_led_value stores LED values of Dynamixel.

dxl1_present_position views where now Dynamixel DXL1_ID points out.

dxl2_moving views whether the Dynamixel is stopped.

// Open port
if (dynamixel.openPort(port_num))
{
  System.out.println("Succeeded to open the port!");
}
else
{
  System.out.println("Failed to open the port!");
  System.out.println("Press any key to terminate...");
  scanner.nextLine();
  return;
}

First, controller opens #port_num port to do serial communication with the Dynamixel. If it fails to open the port, the example will be terminated.

// Set port baudrate
if (dynamixel.setBaudRate(port_num, BAUDRATE))
{
  System.out.println("Succeeded to change the baudrate!");
}
else
{
  System.out.println("Failed to change the baudrate!");
  System.out.println("Press any key to terminate...");
  scanner.nextLine();
  return;
}

Secondly, the controller sets the communication BAUDRATE at #port_num port opened previously.

// Enable Dynamixel#1 Torque
dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL1_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_ENABLE);
if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
{
  dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
}
else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
{
  dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
}
else
{
  System.out.printf("Dynamixel#%d has been successfully connected\n", DXL1_ID);
}

// Enable Dynamixel#2 Torque
dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL2_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_ENABLE);
if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
{
  dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
}
else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
{
  dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
}
else
{
  System.out.printf("Dynamixel#%d has been successfully connected\n", DXL2_ID);
}

As mentioned in the document, above code enables each Dynamixel`s torque to set their status as being ready to move.

write1ByteTxRx() function sends an instruction to the #DXL1_ID and #DXL2_ID DYNAMIXEL in PROTOCOL_VERSION communication protocol through #port_num port, writing 1 byte of TORQUE_ENABLE value to ADDR_PRO_TORQUE_ENABLE address. The function checks Tx/Rx result and receives Hardware error. getLastTxRxResult() function and getLastRxPacketError() function get either, and then printTxRxResult() function and printRxPacketError() function show results on the console window if any communication error or Hardware error has been occurred.

// Add parameter storage for Dynamixel#1 present position value
dxl_addparam_result = dynamixel.groupBulkReadAddParam(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);
if (dxl_addparam_result != true)
{
  System.out.printf("[ID: %d] groupBulkRead addparam failed\n", DXL1_ID);
  return;
}

// Add parameter storage for Dynamixel#2 present moving value
dxl_addparam_result = dynamixel.groupBulkReadAddParam(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);
if (dxl_addparam_result != true)
{
  System.out.printf("[ID: %d] groupBulkRead addparam failed\n", DXL2_ID);
  return;
}

groupBulkReadAddParam() function stores the Dynamixel ID and address ADDR_PRO_PRESENT_POSITION or ADDR_PRO_LED_RED, byte length LEN_PRO_PRESENT_POSITION or LEN_PRO_LED_RED of required data to the bulkread target Dynamixel list.

while (true)
{
  System.out.println("Press enter to continue! (or press e then enter to quit!)");
  if(scanner.nextLine().equals(KEY_FOR_ESCAPE))
    break;

  // Add parameter storage for Dynamixel#1 goal position
  dxl_addparam_result = dynamixel.groupBulkWriteAddParam(groupwrite_num, DXL1_ID, ADDR_PRO_GOAL_POSITION, LEN_PRO_GOAL_POSITION, dxl_goal_position[index], LEN_PRO_GOAL_POSITION);
  if (dxl_addparam_result != true)
  {
    System.out.printf("[ID: %d] groupBulkWrite addparam failed", DXL1_ID);
    return;
  }

  // Add parameter storage for Dynamixel#2 LED value
  dxl_addparam_result = dynamixel.groupBulkWriteAddParam(groupwrite_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED, dxl_led_value[index], LEN_PRO_LED_RED);
  if (dxl_addparam_result != true)
  {
    System.out.printf("[ID: %d] groupBulkWrite addparam failed", DXL2_ID);
    return;
  }

  // Bulkwrite goal position and LED value
  dynamixel.groupBulkWriteTxPacket(groupwrite_num);
  if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
    dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);

  // Clear bulkwrite parameter storage
  dynamixel.groupBulkWriteClearParam(groupwrite_num);

  do
  {
    // Bulkread present position and moving status
    dynamixel.groupBulkReadTxRxPacket(group_num);
    if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
      dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);

    dxl_getdata_result = dynamixel.groupBulkReadIsAvailable(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);
    if (dxl_getdata_result != true)
    {
      System.out.printf("[ID: %d] groupBulkRead getdata failed\n", DXL1_ID);
      return;
    }

    dxl_getdata_result = dynamixel.groupBulkReadIsAvailable(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);
    if (dxl_getdata_result != true)
    {
      System.out.printf("[ID: %d] groupBulkRead getdata failed\n", DXL2_ID);
      return;
    }

    // Get Dynamixel#1 present position value
    dxl1_present_position = dynamixel.groupBulkReadGetData(group_num, DXL1_ID, ADDR_PRO_PRESENT_POSITION, LEN_PRO_PRESENT_POSITION);

    // Get Dynamixel#2 moving status value
    dxl2_led_value_read = (short)dynamixel.groupBulkReadGetData(group_num, DXL2_ID, ADDR_PRO_LED_RED, LEN_PRO_LED_RED);


    System.out.printf("[ID: %d] Present Position : %d [ID: %d] LED Value : %d\n", DXL1_ID, dxl1_present_position, DXL2_ID, dxl2_led_value_read);

  } while (Math.abs(dxl_goal_position[index] - dxl1_present_position) > DXL_MOVING_STATUS_THRESHOLD);

  // Change goal position
  if (index == 0)
  {
    index = 1;
  }
  else
  {
    index = 0;
  }
}

During while() loop, the controller writes and reads each Dynamixel position or moving status through packet transmission/reception(Tx/Rx).

To continue their rotation, press any key except ESC.

groupBulkWriteAddParam() function stores the Dynamixel ID and its goal position dxl_goal_position or red LED value dxl_led_value to the bulkwrite target Dynamixel list.

groupBulkWriteTxPacket() function sends an instruction to the Dynamixel #DXL1_ID and #DXL2_ID at the same time through the port, making it possible to write data bytes to different address. (In this example, LEN_PRO_GOAL_POSITION bytes of the values to the address ADDR_PRO_GOAL_POSITION and LEN_PRO_LED_RED bytes of the values to the address ADDR_PRO_LED_RED, each.) The function checks Tx/Rx result and receives Hardware error. getLastTxRxResult() function and getLastRxPacketError() function get either, and then printTxRxResult() function and printRxPacketError() function show results on the console window if any communication error or Hardware error has been occurred.

groupBulkWriteClearParam() function clears the Dynamixel list of groupbulkwrite.

groupBulkReadTxRxPacket() function sends an instruction to the Dynamixel #DXL1_ID and #DXL2_ID at the same time through the port, making it possible to require data bytes from different address. (In this example, LEN_PRO_PRESENT_POSITION bytes of the values to the address ADDR_PRO_PRESENT_POSITION and LEN_PRO_LED_RED bytes of the values to the address ADDR_PRO_LED_RED, each.) The function checks Tx/Rx result and receives Hardware error. getLastTxRxResult() function and getLastRxPacketError() function get either, and then printTxRxResult() function and printRxPacketError() function show results on the console window if any communication error or Hardware error has been occurred.

groupBulkReadIsAvailable() function checks if available data is in the groupbulkread data storage. The function returns false if no data is available in the storage.

groupBulkReadGetData() function pop the data received by groupBulkReadTxRxPacket() function out. In the example, it stores LEN_PRO_PRESENT_POSITION byte data got from ADDR_PRO_PRESENT_POSITION address of DXL1_ID Dynamixel and LEN_PRO_LED_RED byte data got from ADDR_PRO_LED_RED address of DXL2_ID Dynamixel, each.

groupBulkReadClearParam() function clears the Dynamixel list of groupbulkread.

Reading their present position will be ended when absolute value of (dxl_goal_position[index] - dxl1_present_position) becomes smaller then DXL_MOVING_STATUS_THRESHOLD.

At last, it changes their direction to the counter-wise and waits for extra key input.

// Disable Dynamixel#1 Torque
dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL1_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_DISABLE);
if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
{
  dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
}
else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
{
  dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
}

// Disable Dynamixel#2 Torque
dynamixel.write1ByteTxRx(port_num, PROTOCOL_VERSION, DXL2_ID, ADDR_PRO_TORQUE_ENABLE, TORQUE_DISABLE);
if ((dxl_comm_result = dynamixel.getLastTxRxResult(port_num, PROTOCOL_VERSION)) != COMM_SUCCESS)
{
  dynamixel.printTxRxResult(PROTOCOL_VERSION, dxl_comm_result);
}
else if ((dxl_error = dynamixel.getLastRxPacketError(port_num, PROTOCOL_VERSION)) != 0)
{
  dynamixel.printRxPacketError(PROTOCOL_VERSION, dxl_error);
}

The controller frees the DYNAMIXEL to be idle.

write1ByteTxRx() function sends an instruction to the #DXL1_ID and #DXL2_ID DYNAMIXEL in PROTOCOL_VERSION communication protocol through #port_num port, writing 1 byte of TORQUE_DISABLE value to ADDR_PRO_TORQUE_ENABLE address. The function checks Tx/Rx result and receives Hardware error. getLastTxRxResult() function and getLastRxPacketError() function get either, and then printTxRxResult() function and printRxPacketError() function show results on the console window if any communication error or Hardware error has been occurred.

// Close port
dynamixel.closePort(port_num);

return;

Finally, port becomes disposed.